
8
IMPORTANT
This unit is equipped with a smart panel that senses your
touch. Heavy pushing of buttons is not recommended.
CHECK
the air purifier has a filter. Be sure the supplied filter
is properly in place and all plastic is removed before turning
the unit on.
PLACE
the air purifier on a hard surface such as the floor, a table
or desk. Be sure the grilles are not blocked by other objects,
and there are no candles or flames near the unit.
PLUG IN
into nearest standard electrical outlet.
LIGHTLY TOUCH
the power button to turn the air purifier on.
Touch the power button again to turn the air purifier off.
SELECT THE FAN SPEED
to select the speed, lightly touch and
release the fan speed button until the desired speed is reached.
ADJUST THE TIMER
the unit will turn off once it runs for the
selected hours.
Note:
The unit will run continuously if all the timer lights are off.
THE CHECK FILTER LIGHT
the filter light will illuminate when the
filter needs to be replaced. Once replaced, touch and hold the button
for several seconds until the filter indicator light goes off.
Note:
To order a replacement filter visit vax.co.uk
LIGHTLY TOUCH
ION control to switch the ionisation on/off.
Getting started
HOW THE AIR PURIFIER WORKS
An air purifier draws in room air from its air inlet, lets the air pass
through the filter that consists of a pre-filter and HEPA filter inside of the
unit, then releases clean purified air from its air outlet. The air purifier
repeats this process by moving its internal fan. As air passes through the
HEPA filter, it removes airborne particles such as smoke, dust, pollen, and
other potentially harmful particles which could cause allergies, asthma
and hay fever.
Choosing a Location
To maximize air circulation, position the air purifier at least 50cm away
from walls, or any other large objects that could disrupt the airflow.
For optimum results close all windows and doors. For more efficient
air treatment, place the unit in a central location and make sure the
control panel can easily be accessed.