12
Figure 5 Top cover thumb screw
Figure 6 – Heat exchanger ready to be removed
Fresh-r Everywhere – remove the top panel
o
To remove the top panel, release the two retention screws, tilt the panel away from the
heat exchanger clamp and pull the panel downwards from the retention bracket at the
top of the unibody. There are two retention hooks at the top of the unibody similar to
those on the filter shown above.
Fresh-r air separator bar/heat exchanger clamp
o
Remove the air separator bar by removing the two retention bolts – use a torx 25
o
Pull the separator bar straight away
o
Pull the Heat exchanger out the unibody
Figure 7 – Fresh-r middle bar separator