Vava VA-VD002, Руководство пользователя

Страница: 4 / 9

Dash Cam Installation
1. Turn off the car engine.
2. Stick the car mount onto your car windshield (ideally right in the middle).
3. Fix the VAVA
①
Dash Cam onto the mount via the magnet.
4. Connect the USB cable to the micro USB port of the
①
Dash Cam. Run the cable along the edge of the windshield, tucking it away in the
seams, and extend it all the way to the USB port of the
②
Car Charger. Be sure to keep it away from the airbag area.
5. Insert the ② Car Charger into your cigarette lighter, connect the ① Dash Cam to the Car Charger.
6. Plug the rear camera connecting cable into the
③
rear camera connecting port, and install the
③
rear camera properly.
7. Adjust the ① Dash Cam to keep the lens level with the ground.
8. Start the car engine to check if the
①
Dash Cam is working properly.
2
1
1
3
Snapshot Button
Note
：
The Snapshot Button enters standby mode once there is no operation for 1 minute. Press again to restart and take a photo.
Dash Cam and Snapshot Button Pairing
Dash Cam and Snapshot Button Pairing: Once the Dash Cam is turned on, press and hold the Snapshot Button for 5 -20 seconds until you
hear 4 beep sounds. This means that they are synced.
Installing the Snapshot Button
① Install the Snapshot Button onto the steering wheel with the 3M sticker.
②
Attach it to your key chains if needed.
Using the Snapshot Button
①
Taking photos: Press once to take photos
② Taking short videos: Press and hold for 3 seconds until you hear a beep to take videos.
Replacing the battery:
Batterry Model ： Lithuim Battery CR 2032 3V
Replace the battery: Open the Bluetooth Button and put the battery inside with the right polarities.
05/06
VAVA Dash Cam App Download
Please search ‘VAVA Dash’ in App Store or Google Play to download the App.
Note: Systems supported: Android 4.4 and above / iOS 8.0 and above.