2. Bluetooth Connection
1
)
Press and hold the Power Button to turn on the unit with a beep. For the first time,
the speaker enters the pairing mode automatically with the Source indicator flashing
white quickly.
2
)
Make sure the speaker and your Bluetooth® device are next to each other (within
1m / 3ft).
3
)
Activate the Bluetooth® function on your phone or tablet, and search for the nearby
Bluetooth® connections. Find “VAVA VOOM 28” in the search results. Tap on the name
to connect. Once connected, the white LED will remain on.
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
EN
The Bluetooth
®
word mark and logos are registered trademarks
owned by the Bluetooth SIG, Inc. and any use of such marks by Sunvalleytek Internation-
al Inc. is under license. Other trademarks and trade names are those of their respective
owners.
4. AUX Connection
1) Connect the 3.5mm AUX Input port to a sound source device.
2) Press and hold the Power Button to turn on the unit with a beep and the Source
indicator lighting up red.
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Button Control
Power On / Off
*
Next Track
Volume -
Previous Track
Play / Pause
Mute (AUX Mode)
Answer / Hang up Calls
Function
Press and hold the Power Button until a beep is heard.
Press the Button
Press and hold the Button in the Bluetooth mode
Press the Volume - Button
Press and hold the Volume - Button in the Bluetooth mode
Press the Play / Pause Button
Press the Play / Pause Button to mute / unmute
Press Play / Pause Button
Operation
LED Indication
FCC Radiation Exposure Statement:
Source
Indicator
Charging
Indicator
Power on
Flashes white fast
Bluetooth Pairing
Flashes white fast
Bluetooth Connected Stays solid white during playing
AUX Connection
Stays solid red during playing
Charging
Stays solid red
Fully Charged
Turns off
Low Battery
Flashes red quickly with a beep every 3min
Operations
Indicator Status
FCC STATEMENT :
How to Use
1. Charging
1) Connect the charging port with any USB charging adapter or active computer
USB port.
2) Charging will start automatically with the charging indicator turning red.
3) The speaker is fully charged when the charging indicator turns off.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Note
:
• Make sure the battery is fully charged before putting the speaker away for storage.
• Charge the speaker at least once every 3 months when not using for a long time.
• There will be a low battery alarm every 3min, and the speaker will turn off 10min
later.
Note
:
• Make sure the battery is fully charged before putting the speaker away for storage.
• Charge the speaker at least once every 3 months when not using for a long time.
• There will be a low battery alarm every 3min, and the speaker will turn off 10min
later.
3. Smart Voice Control
1) Go to App Store or Google Play, search for “Amazon Alexa”, tap to install.
2) Register your account, and then login.
3) Go to Bluetooth on your mobile, search and pair with this speaker.
4) Open the Alexa app, tap
-> Add Device -> Headphones, tap on VAVA VOOM
28, and Add.
5) Press the Power Button on the speaker or Voice Control Button on your mobile to
enable and use Alexa.
