25
CAUTIONS
ABOUT LASER LIGHT
•
Never look into the projector lens when the laser is turned on; the bright light can
damage your eyes.
•
Do not try to dismantle or modify the projector. It contains a high-power laser
component and serious injury could result.
•
Do not allow small children to operate the projector. They must be accompanied
by an adult for use.
HIGH TEMPERATURE
•
Do not place anything that can become warped or damaged by heat near the
vents.
•
Do not bring your hands or face close to the vents while projection is in progress.
•
Do not place flammable materials such as aerosols near the device in case of fire.
ROUTINE MAINTENANCE
•
Please wipe clean the shell and top cover of the projector routinely with the
cleaning cloth equipped or others for professional use. Do not apply abrasive
detergent, solvent or other coarse chemicals to avoid scrapes. Before cleaning,
unplug the power cord from the socket.
•
Leave plenty of space around the vents for heat dissipation.
•
Do not place anything blocking the speaker for better sound.
•
Dismantling the device will not only fail the warranty but may also cause harm to
your
or others’ safety.
•
Do not use the projector near water, sources of heat, high-voltage electrical
wires, or sources of magnetic fields.
•
If you use the projector in a country other than where you purchased it, use the
correct power cord for that country.
•
Do not block the lens during projection using a book or any other object. This
could damage the projector or cause a fire.
•
Remove the battery from the remote control for long idle time in case of leakage
and damage to the remote.
•
Please follow local regulations to promptly and properly dispose of used
batteries.
