![Vauxhall Vivaro C Скачать руководство пользователя страница 185](http://html1.mh-extra.com/html/vauxhall/vivaro-c/vivaro-c_owners-manual_3865688185.webp)
Driving and operating
183
start moving. Be always prepared
to manually apply the brake to hold
the vehicle stationary.
Do not leave the vehicle while it is
being held at a stop by adaptive
cruise control. Always move
selector lever to park position P
and switch off the ignition before
leaving the vehicle.
Setting the following distance
When adaptive cruise control detects
a slower moving vehicle in the driving
path, it will adjust the vehicle speed to
maintain the following distance
selected by the driver.
The following distance can be set to
close (1 bar), normal (2 bars) or far
(3 bars).
If the engine is running and the
adaptive cruise control is enabled
(grey), you can modify the following
distance setting:
Press GAP, the current setting is
shown in the Driver Information
Centre.
Press GAP again to change the
following distance: The new setting is
displayed in the Driver Information
Centre.
The selected following distance is
indicated by full bars in the adaptive
cruise control page.
9
Warning
The driver accepts full
responsibility for the appropriate
following distance based on traffic,
weather and visibility conditions.
Following distance must be
adjusted or the system switched
off when required by the prevailing
conditions.
Detecting the vehicle ahead
If the system does not detect a vehicle
in the driving path,
U
is displayed
in the Driver Information Centre. The
system operates as conventional
cruise control.
If the system detects a vehicle in the
driving path,
V
is displayed in the
Driver Information Centre. The
system operates as conventional
cruise control.
If the system detects a vehicle in the
driving path which is too close or too
slow, it adjusts the speed accordingly.
X
is displayed in the Driver
Information Centre.
If the system reaches the limit of
adjusting the speed and the driver
does not react to this situation, the
system is automatically deactivated
and
W
is displayed in the Driver
Information Centre.
If the set speed is temporarily
exceeded by the driver, the system is
automatically deactivated and
Z
is
displayed in the Driver Information
Centre.
Содержание Vivaro C
