Lighting
93
Tail lights
Tail lights are illuminated together
with low / high beam, daytime running
lights and sidelights.
Automatic light control
When the automatic light control
function is switched on and the
engine is running, the system
switches between daytime running
lights and headlights automatically
depending on the external lighting
conditions and information given by
the wiper system.
Make sure the sensor is not blocked
95.
Automatic headlight activation
During poor lighting conditions the
headlights are switched on.
Additionally, headlights are switched
on if the windscreen wipers have
been activated for several wipes.
Tunnel detection
When a tunnel is entered, headlights
are switched on immediately.
High beam
Push to switch from low to high beam.
Pull to deactivate high beam.
High beam assist
High beam assist
Once activated, the high beam assist
switches high beam automatically on
and off depending on vehicle speed
and detected objects by the camera
in the windscreen. This provides the
best light distribution to the driver in
each situation while avoiding dazzling
other road users.
In the following cases, high beam is
deactivated:
● driving in urban areas
● snowy or foggy weather
conditions
● rear fog light switched on
If no restrictions are detected, the
system switches back to high beam.
Glare-free high beam for Matrix-LED
headlights
Содержание Grandland
