Vauxhall Grandland, Руководство пользователя

Страница: 132 / 269

130 Driving and operating
The automatic transmission
automatically shifts to P if
● the engine is switched off
● the driver's door is opened while
the vehicle's speed is below
1 mph
Gear selection type C
Move the selector lever in the shifting
gate as shown in the illustration
above.
P : park position, front wheels are
locked, engage only when the
vehicle is stationary and the
parking brake is applied
R : reverse gear, engage only when
the vehicle is stationary
N : neutral
D : automatic mode
M : manual mode
+ : upshift in manual mode
- : downshift in manual mode
The selector lever is locked in P and
can only be moved when the ignition
is on and the brake pedal is applied.
The engine can only be started with
the selector lever in position P or N.
When position N is selected, press
the brake pedal or apply the parking
brake before starting.
Do not accelerate while engaging a
gear. Never depress the accelerator
pedal and brake pedal at the same
time.
When a gear is engaged, the vehicle
slowly begins to creep when the
brake is released.
Engine braking
To utilise the engine braking effect,
select a lower gear in good time when
driving downhill, see manual mode.
Rocking the vehicle
Rocking the vehicle is only
permissible if the vehicle is stuck in
sand, mud or snow. Move the selector
lever between D and R in a repeat
pattern. Do not race the engine and
avoid sudden acceleration.
Manual mode
The selected gear is indicated in the
Driver Information Centre.
If a higher gear is selected when
vehicle speed is too low, or a lower
gear when vehicle speed is too high,
the shift is not executed. This can
cause a message in the Driver
Information Centre.
In manual mode, no automatic
shifting to a higher gear takes place
at high engine revolutions.