Driving and operating
169
The screen in the Info Display is
divided into two parts. On the right
there is a view from above the vehicle
and on the left there is the view from
the rear or the front displayed. If the
vehicle is equipped with ultrasonic
parking sensors, they complete the
information on the view from above
the vehicle.
Activation
The panoramic view system is
activated by:
● engaging a gear or gearbox in a
neutral position (front view)
● engaging reverse gear (rear
view)
● manual activation in the Info
Display when driving not more
than 12 mph
Functionality
Different views can be selected in the
left part of the display. Change the
type of view at any time during a
manoeuvre by touching the touch
field in the left lower zone of the
display and selecting a view from the
view selection menu:
● Standard view
● Auto mode
● Zoom view
● 180° view
The display is immediately updated
with the type of view selected.
The state of the system is not kept in
memory when the ignition is switched
off.
Standard view
The standard view consists of a rear
view and a front view.
Rear view
The area behind the vehicle is
displayed in the screen. The vertical
lines represent the width of the
vehicle with mirrors unfolded. The
direction of the lines changes with the
position of the steering wheel.
The first horizontal line represents a
distance of about 30 cm beyond the
edge of vehicle's rear bumper. The
upper horizontal lines represent
distances of about 1 m and 2 m.
This view is available in auto mode or
in the view selection menu.
Содержание Grandland
