
Vehicle care
331
The spare wheel is located in a holder
beneath the vehicle floor.
Vehicle tools
321.
1. Depending on the version, open
the tailgate or the rear doors
2. Fit the wheel wrench on one
hexagon bolt. Turn it
anticlockwise until the spare
wheel holder is low enough allow
the catch to be unhooked.
3. Lift the spare wheel holder and
unhook the catch.
Lower the spare wheel holder.
4. Remove the spare wheel.
5. Change the wheel.
6. Position the damaged wheel with
the outside down in the spare
wheel holder.
7. Lift the spare wheel holder and
engage in the catch. The open
side of the catch must point in the
direction of travel.
8. Close the spare wheel holder by
turning the hexagon bolt
clockwise using the wheel
wrench.
9. Stow wheel wrench in the storage.
10. Close the tailgate or the rear
doors.
Only mount one temporary spare
wheel. The permissible maximum
speed on the label on the temporary
spare wheel is only valid for the
factory-fitted tyre size.
Fitting the spare wheel
Make the following preparations and
observe the following information:
● Park the vehicle on a level, firm
and non-skid surface. The front
wheels must be in the straight-
ahead position.
Содержание COMBO
