Vauxhall Ampera 2014, Руководство пользователя

Страница: 90 / 203

Lighting 89
Note
Do not cover the light sensor
otherwise the AUTO mode will not
operate properly.
Automatic light activation
During poor lighting conditions, the
low beam is switched on.
Furthermore the low beam, parking
lights and other exterior lights are
switched on if the windscreen wipers
have been activated. The transition
time for the lights coming on varies
based on wiper speed. When the
wipers are not operating, these lights
turn off. Move the exterior light control
to
m
or
8
to disable this feature.
Tunnel detection
When a tunnel is entered, the low
beam is switched on.
High beam
To switch from low to high beam,
push the turn and lane-change signal
lever.
To switch to low beam, push lever
again or pull.
Headlight flash
To activate the headlight flash, pull
the turn and lane-change signal lever.
Headlight range
adjustment
To adapt headlight range to the
vehicle load to prevent dazzling: turn
thumb wheel ? to required position.
0 = front seats occupied
1 = all seats occupied
2 = all seats occupied and load
compartment laden
3 = driver's seat occupied and load
compartment laden