Vauxhall 2014 Ampera Infotainment System, Инструкция по информационно-развлекательной системе

Страница: 65 / 75

64 Phone
Pairing with Infotainment
controls
A Bluetooth-enabled mobile phone
must be paired and then connected to
the vehicle before it can be used. See
your mobile phone manufacturer's
user guide for Bluetooth functions
before pairing the mobile phone.
Pairing information
■ A Bluetooth-enabled phone and an
audio playback device can be
paired to the system at the same
time.
■ Up to five devices can be paired to
the Bluetooth system.
■ The pairing process is disabled
when the vehicle is moving.
■ Pairing only needs to be completed
once, unless the pairing information
on the mobile phone changes or the
mobile phone is deleted from the
system.
■ Only one paired mobile phone can
be connected to the Bluetooth
system at a time.
■ If multiple paired mobile phones are
within range of the system, the
Infotainment system will connect to
the first phone in the list or to the
phone that was previously
connected.
Pairing a phone/device
1. Press the CONFIG button
or
:
.
2. Select Phone Settings.
3. Select Pair Device (Phone). The
Infotainment system displays
“Please start Bluetooth search on
your phone.” If the device
supports a four-digit Personal
Identification Number (PIN), it will
be displayed. The PIN is used in
step 5.
4. Start the pairing process on the
mobile phone to be paired to the
vehicle. See the mobile phone
manufacturer's user guide.
5. Locate and select the device
named after the vehicle make and
model in the list on the mobile
phone. Follow the instructions on
the mobile phone to enter the PIN
provided in step 3, or to confirm
the six-digit code matches. The
system recognises the new
connected phone after the pairing
process is complete.
6. If the phone prompts to accept
connection or allow phone book
download, always select accept to
allow this. The phone book may
not be available if not accepted.
Some phones will put connection
request or phonebook request in
a pull down task bar at the top of
the screen. Drag down the task
bar and look for connection/
phonebook request and accept.
7. Repeat to pair additional phones.
Listing all paired and connected
phones/devices
1. Press the CONFIG button.
2. Select Phone Settings.
3. Select Device list.