OPERATING MANUAL 2000 HGS V8.4/20-EN
Page | 5
separated from the threaded connection piece (H26) and replaced with the cav-
ity spray hose (2900 H).
7.
Maintenance and care
After each use, disconnect the device from the compressed air supply and thor-
oughly clean it. We recommend benzine or commercially available terpene-
based cleaners.
Do not use aggressive cleaners!
Following the maintenance in-
structions will ensure a long service life and trouble-free operation of this qual-
ity product.
Attention:
Pay attention to a proper disposal of the residues, which arise
during the maintenance and care.
8.
Storage
The compressed air tool must be stored under the following conditions:
•
If residual material is present, store only upright.
•
Carefully clean the spray gun after each use.
•
Carefully clean the cavity spray hose after each use.
•
Store in a dry and dust-free place.
•
Do not expose to liquids and/or aggressive chemicals.
•
Keep out of the reach of children.
9.
Troubleshooting
In all cases of malfunction, please first check whether there is sufficient com-
pressed air available, whether the spray material can still be processed, wheth-
er the expiry date has passed or whether the material has dried out.
•
Gun sprays messy
Possible cause: Spray pipe, riser pipe and/or ventilation hole dirty.
Solution: Clean parts.
•
Gun does not spray any material
Possible cause: Riser pipe, spray pipe and/or nozzles clogged.
Solution: Clean clogged parts.
•
Air escapes from the spray nozzle even though the trigger is in its initial
position.
Possible cause: Valve bolt is jammed.
Solution: Pour oil onto the valve bolt and/or into the compressed air intake.
Operate the trigger several times.
10.
Warranty terms
The basis for all warranty claims is the complete spray gun and the proof of
purchase. Damage caused by improper handling of the spray gun is not covered
by the warranty.
