To delete fingerprints press and hold the '3' key then "PROGRAM" button together
until the safe beeps and the screen prompts you to enter your master code. Enter
your master code on the keypad. If the code is correct, the safe will beep and the
screen will indicate deletion of all the fingerprints. This will remove all the
fingerprints. You can delete individual fingerprints in the Vaultek™ app.
The LCD screen has four brightness levels: 25%, 50%, 75%, and 100%. To toggle
the LCD brightness press and hold '5' and '8' together for 3 seconds. The screen will
indicate the brightness level.
To check the battery level press and hold keys '6' and '8' together for 3 seconds. The
screen will indicate the battery level. See pages 07 to 09 for more information.
To toggle the Dual Entry ON/OFF press and hold the '8' key then "PROGRAM"
button together for 3 seconds. The screen will indicate ENABLED or DISABLED. If
the Dual Entry is toggled ON, you will be required to enter your master code and
fingerprint (and vice versa) to open the safe. This mode requires that at least one
fingerprint be programmed in the safe.
Your Vaultek™ safe has a built-in accelerometer and corresponding alarm that
alerts of any attacking to your safe including bumps and impacts, DMT
(Impact
Detection).
DMT is enabled by default and its sensitivity has three settings;
Low, Medium, and High. You can toggle through these settings by pressing and
holding the '7' key then "PROGRAM" button together for 3 seconds. The screen will
indicate LOW, MEDIUM, and HIGH as well as DISABLED.
The Smart Key has THREE modes: OFF, Progressive Entry Mode, and On Demand
Entry Mode.
OFF
disables Smart Key access.
Progressive Entry Mode
requires that
you press one key on the safe keypad first and then activate the Smart Key.
On
Demand Entry Mode
grants immediate access when activating the Smart Key.
Pressing and holding the '6' key then "PROGRAM" button together for 3 seconds
will allow you to toggle through each mode from the keypad. You may also alternate
modes in the Vaultek™ app.
Delete Fingerprints
Press and hold '3' then
"PROGRAM" button then
enter master code
Toggle LCD
Brightness
Press and hold '5'and '8'
To toggle the Bluetooth
ON/OFF press and hold the '4' key then "PROGRAM"
button together for 3 seconds. The screen will indicate ENABLED or DISABLED.
If Bluetooth
is toggled OFF all app functions will be disabled and your safe is
undiscoverable.
Toggle Bluetooth
Press and hold '4' then
"PROGRAM" button
Toggle Smart Key
Modes
Press and hold '6'
then
"PROGRAM" button
Toggle DMT
Sensitivity
Press and
hold '7' then "PROGRAM"
button
Toggle Dual
Entry Mode
Press and hold '8' then
"PROGRAM" button
Save battery life by disabling the proximity sensor, fingerprint sensor, keypad, status
bar, and Bluetooth
features. To toggle travel mode ON/OFF press and hold keys '1'
and '8' together for 3 seconds. The screen will indicate ENABLED or DISABLED.
19 Vaultek™
20 Vaultek™