Quick Start Guide
Product Registration
Vaultek
®
strongly encourages you to register your LifePod
®
as soon as you receive it.
Registration
provides many benefits including two year warranty, technical support, and ordering replacement
keys should you misplace them.
Your Vaultek
®
LifePod
®
has a unique product number on the inside
of the battery door and a 4-digit ID number engraved on the keys. You will need these numbers to
register your new unit.
Locate your product number. It is printed on the first page of this user manual and on the back of
the battery door (Fig H).
Find your 4-digit ID number engraved on the keys (Fig I).
Please visit the Vaultek
®
website at vaulteksafe.com and click Support then click Registration
from the available options.
Enter the required information in the form and click submit.
06 Vaultek
®
I
H
05 Vaultek
®
•
•
•
Tip!
Water will affect the keypad
performance. Wipe away excess
water and dry off the keypad
when opening for best results
and to prevent unwanted water
from entering the storage
compartment.
G
IMPORTANT!
The PROGRAM button will not function when
locked. Be sure the LifePod
®
latch is in the unlocked position.
First open the unit and tap the lock pad to wake the unit up
(Fig E). When the keypad lights up, your LifePod
®
is awake and
ready for programming.
While LifePod
®
is awake press and hold the PROGRAM button
for 3 seconds (Fig F) until ALL keys (1-4) turn solid RED.
F
Enter your new code. Immediately press and hold the PROGRAM button a second time for 3
seconds (Fig F) until ALL keys (1-4) turn solid RED.
Enter your new code a second time. Immediately press and hold the PROGRAM button a third
time for 3 seconds (Fig F). The status LED (Fig G) will flash GREEN and LifePod
®
will beep to
confirm the code change is successful. If you make a mistake start over with step 1.
E
Quick Start Guide
Master Code Programming
First time users should change the default code as soon as
possible to prevent unauthorized access when using the lock.
TIP:
Code Requirements
The default master code is 1-2-3-4.
Your code can be a minimum of 4 digits, or as long as 8 digits.
Two keys can not be pressed simultaneously.
Programming a new code will overwrite your previous code.
Step 2
Step 3
•
