Master Code Programming
First time users should change the default code as soon as possible to prevent unauthorized access to your safe.
Programming Tips!
Your code can be a minimum of 4 and a maximum of 8 digits. We recommend a code 6 to 8 digits in length
using at least one of each key to make it more difficult for someone to guess your code. For your security, the
safe will time out and sleep for 4 minutes if 6 incorrect entries are made.
Two keys cannot be pressed simultaneously.
Programming a new code will overwrite your previous code.
Default master code is 1-2-3-4-5 on the keypad.
07 Vaultek
®
-
-
-
Open the safe. With the safe open, press and hold the "PROGRAM"
button (3 seconds) (Figure D) until all keys (1-5) light up RED and let go.
Enter your NEW master code.
Immediately press and hold the "PROGRAM" button a second time
(3 seconds) until all keys (1-5) light up RED and let go.
Enter your NEW master code a second time.
Immediately press and hold the "PROGRAM" button a third time
(3 seconds) until the safe beeps and let go. The keypad will flash GREEN
if successful. Now test the code.
Product Registration
Vaultek
®
strongly encourages you to register your safe as soon as you receive it.
Registration provides many
benefits including three year warranty, technical support, and ordering replacement keys should you misplace
them.
Your Vaultek
®
safe has a unique product number on the inside of the battery door and a 4-digit ID number
engraved on the keys. You will need these numbers to register your safe.
Locate your product number. It is printed on the first page of this user manual and on the back of the battery door
(Figure E/F).
Find your 4-digit ID number engraved on the keys (Figure G).
Please visit the Vaultek
®
website at vaulteksafe.com and click Support/Product Registration.
Enter the required information in the form and click submit.
08 Vaultek
®
For setup, tutorials, and FAQs visit www.vaulteksafe.com/support/ and select your model.
D
E
F
G
-
Troubleshooting!
If you make a mistake and the new code will not work, simply start over with step 1.
