Vaughn Hydrastone ME Series, Руководство по эксплуатации и установке

Страница: 15 / 20

14
PARTS LIST
1.
Top Pan
2.
Relief Valve - Located above and to the left of hot water outlet.
3.
High Limit Safety Switch – Manual reset switch designed to shut off all
electrical circuits if water reaches the setpoint of 170

F or greater.
4.
Automatic Thermostats – For constant temperature control, thermostats
are specifically designed for Hydrastone

water heaters. Located under
access plates.
5.
Plastic Jacket – Durable & easy-to-clean jacket is hi density plastic.
6.
Water Diffuser – Introduces cold water at the bottom of the tank in a flat,
gentle swirl, preventing turbulent mixing with heated water above. Tank
drain is also a part of the cold water diffuser.
7.
Hot Water Outlet Nipple with Heat Trap
8.
Wiring & Connections – Located in front of the heater for easy
installation and access. All wiring is designed for operation up to 6KW @
240volts.
9.
Long-Life Heating Elements – Waste is reduced with immersed heating
elements because all available heat passes directly into the water. Low watt
density elements assure longer life – and reduce mineral buildup.
10.
High-Density Insulation – Two inches of high-density foam blanket the
storage tank. Extra thickness on top and bottom significantly reduce heat
loss.
11.
Bottom Pan
NOTE: When ordering parts, please specify model and serial number of tank,
shown on the rating plate, as well as parts name, information and number.