USER MANUAL
Vauconsant SA, all rights reserved A329xx & A320xx -rev0-FR, 10th November 2009 - 4 -
Installation / Controls
•
Installation:
o
Insert the module into the purpose-cut slot.
o
Before connecting to the mains, you must check that the existing voltage is suitable for the
one mentioned on the unit's identity plaque.
Connect to the mains using the cabling fuse holder.
The line should be protected by a differential circuit breaker on the general electricity panel.
o
The cabling of the electricity panel must be located in
closed premises
.
o
Seal the top with a silicone joint.
o
Installation of a breath shield (heating display option)
1.
Dismantle the upper glass brackets with a six-sided spanner Ø 2.5
2.
Stick the black non-slip adhesive patches in the specified markings on the part of the
bracket in contact with the breath shield.
3.
Install the glass, the non-domed end should be positioned 120 km from the edge of
the beam.
4.
Tighten the upper brackets.
Upper brackets
