Vathin DVM-B1, Руководство пользователя

Страница: 30 / 37

26
Appendix 1. Electromagnetic Compatibility
Essential Performance
The product is designed to provide images for observation, excluding short-term automatically recoverable
reduction caused by electromagnetic interference.
The following cable information is given for EMC reference only.
Cable Max. cable length
Shielded/unshielded
Qty. Category
AC power cable 1.8 m
Unshielded 1 set
AC power supply
DC power cable 1.3 m
Unshielded 1 set
DC power supply
USB cable 2.8 m Shielded
1 set
Signaling
HMDI-DVI cable 2.8 m Shielded
1 set Signaling
HDMI cable 2.8 m Shielded
1 set Signaling
Important information on electromagnetic compatibility (EMC)
The product shall be subjected to special precautions regarding EMC, and the EMC information provided in its
user's manual shall apply when using it. The product complies with IEC 60601-1-2:2014 in terms of immunity and
emission. However, the following special considerations shall be observed:
The equipment with above-mentioned ESSENTIAL PERFORMANCE is intended used in Professional healthcare
facility environment, except for any places that is near the RF shielding room of the ME system for magnetic
resonance imaging (MRI) with high electromagnetic interference intensity.
Warning

It is required to avoid using the product next to or stacked with other equipment; Otherwise, improper
operation may be caused. If you have to do so, the product and other equipment should be observed carefully
to verify that they can operate properly.

The use of accessories, transducers or cables other than those specified or provided by the manufacturer of
the product may increase electromagnetic radiation or reduce electromagnetic interference, and cause
improper operation.

When using any portable radio frequency communication equipment (including antenna cables, external
antennas and other peripheral equipment), such equipment should be placed over 30 cm (12 inches) away
from any part of the product, including the cables specified by the manufacturer; Otherwise, the performance
of such equipment may be impaired.