Vaterra SLICK ROCK, Руководство пользователя

Страница: 15 / 20

EN
TRANSMITTER CONTROLLED PROGRAMMING
1 Power ON the transmitter and set the
transmitter’s throttle endpoint travel
to maximum and the throttle trim to
the center position.
2
Hold the throttle trigger at full throttle,
then power ON the ESC.
3 Continue holding the throttle trigger
at full throttle until a beep sounds and
both red and green LEDs flash, then
release the throttle to neutral.
4
The ESC is now in programming
mode. The ESC will cycle through its
programmable features in this order:
a Green
Change Battery Chemis-
LED only try Type: Ni-MH or Li-Po
b Red
Transmitter/ESC
LED only Endpoint Calibration
c Red +
Change ESC Running
Green Mode: Forward/Reverse
LED with Smart Brake,
Forward Only with Brake
or Crawler Mode
5
Move the throttle trigger to full
throttle and back to neutral at A, B or
C in order to execute the setting task.
a Change Battery Chemistry Type:
Ni-MH or Li-Po
•
The respective LED will indicate
the current battery type for 4
seconds:
-
Solid Green LED Ni-MH
-
Solid Red LED Li-Po
•
Move the throttle trigger to full
throttle and return to neutral
within the 4 seconds. A beep will
sound and the respective LED
will indicate the updated
battery type.
•
To change back to the previous
battery type, repeat the step above
within 4 seconds of the beep.
•
Both the red and green LEDs
will flash 3 times with 3 beeps.
•
Power OFF the ESC and then power
ON the ESC to return to normal
operation.
b Transmitter/ESC Enpoint Calibration
•
After executing the setting task, the
green LED will flash as you release
the throttle trigger to neutral. Once
neutral is reached, a beep will sound
and the green LED will glow solid for 1
second. The red LED will begin to flash.
•
Move the throttle trigger to full throttle
and hold it until a beep sounds and
the red LED glows solid for 1 second.
Release the throttle trigger to neutral
and the red LED will glow solid while the
green LED will begin to flash.
•
Move the throttle trigger to full brake/
reverse and hold until a beep sounds
and the green LED glows solid.
•
Release the throttle trigger to neutral.
Both red and green LEDs will flash 3
times with 3 beeps.
•
Power OFF the ESC and then power ON
the ESC to return to normal operation.
OPERATION
LED STATUS
waiting for throttle position position set
Neutral
Flashing Green Solid Green (1 second)
Forward Flashing Red Solid Red (1 second)
Full Brake/
Reverse
Solid Red
/
Flashing Green Solid Green (1 second) followed
by Red and Green flashing 3x
DYNAMITE TAZER MINI WATERPROOF BRUSHED ESC / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
SMART BRAKE
When the throttle is changed from
Forward to Reverse or Reverse to
Forward, the ESC will brake instead of
reversing the motor immediately. The
ESC will remain in brake mode unless
the throttle is returned to the neutral/
stop position for a short time.
c Change ESC Running Mode: Forward/Reverse with Smart Brake, Forward Only with Brake or Crawler Mode
•
The respective LEDs will indicate
the currently selected ESC running
mode for 4 seconds:
-
Green Forward/Reverse
LED Solid with Smart Brake
-
Green LED Forward Only
Flashing with Brake
-
Red + Green Crawler Mode
LED Solid
•
Move the throttle trigger to full throttle
within the 4 seconds to select the next
ESC mode. A beep will sound and the
respective LED will indicate the new
ESC running mode.
•
To select the next mode, repeat
the step above within 4 seconds
of the beep.
•
Both red and green LEDs will flash
3 times with 3 beeps.
•
Power OFF the ESC and then power ON
the ESC to return to normal operation.
•
At any time that the ESC is powered
and the transmitter is at the neutral/
stop position, the respective LEDs will
indicate the current ESC running mode:
-
Green Forward/Reverse
LED Solid with Smart Brake
-
Green LED Forward Only
Flashing
with Brake
-
Red + Green Crawler Mode
LED Solid