Installation, Operating & Maintenance Instructions
Series 284, DN 16, 25, 40, 63
(ID 5/8”, 1”, 1½”, 2½”)
Series 285, DN 16, 25, 40, 63
(ID 5/8”, 1”, 1½”, 2½”)
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 [email protected] www.vatvalve.com
268249EF
2011-07-14
1/8
UHV Angle valve
●
with manual actuator,
This manual is valid for the valve ordering number(s):
284..
285..
The fabrication number is indicated on each product as per the label
below (or similar):
made in Switzerland
Fabrication No.:
patented
. .
284. . – . . . . – . . . . / . . . .
A – . . . . . .
Fabrication number
Explanation of symbols:
Read declaration carefully before you start any other
action!
Keep body parts and objects away from the valve
opening!
Attention!
Hot surfaces; do not touch!
Product is in conformity with EC guidelines,
if applicable!
Loaded springs and/or air cushions are potential
hazards!
Disconnect electrical power and compressed air
lines. Do not touch parts under voltage!
Wear gloves!
Read these «Installation, Operating & Maintenance Instructions» and the enclosed «General
Safety Instructions» carefully before you start any other action!
