Installation, Operating, and Maintenance Instructions
Series 08, DN 63 - 100 (2½" - 4")
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 [email protected] www.vatvalve.com
222687EC
2003-04-14
1/8
Insertable Gate Valve
with pneumatic actuator
This manual is valid for the valve ordering numbers:
08036-FA14/24/34/44
08038-FA14/24/34/44
08040-FA14/24/34/44
The respective product identification is given on each valve in the following way
(or similar):
made in Switzerland
Fabrication No.:
patented
96
F08
–
. . . . . / . .
08
. . . – . . . . – . . . .
Explanation of symbols:
Read declaration carefully before you start any other
action!
Keep body parts and objects away from the valve
opening!
Attention!
Hot surfaces; do not touch!
Product is in conformity with EC guidelines,
if applicable!
Loaded springs and/or air cushions are potential
hazards!
Disconnect electrical power and compressed air lines.
Do not touch parts under voltage!
Wear gloves!
Read these
«Installation, Operating & Maintenance Instructions»
and the enclosed
«General
Safety Instructions»
carefully before you start any other action!
