VASTEX E2-CTS-2536, Оригинальное руководство пользователя

Страница: 8 / 12

3) Unplug main power cord.
4) Front hinge panel can be optionally placed on the ground for easier access by
pushing panel catch inward.
5) Disconnect the defective light bar connector (each bar has its own connector),
then remove the top, #8 nut holding down the light bar.
6) Installing the new light bar. Seat the light bar in its corresponding slot and attach
the connector.
7) Test the new light bar. See above step 2.
8) Secure the bar with the #8 nut.
9) Close the front hinge panel and replace the #8 sheet metal screws.
Troubleshooting Cont’d
Step 4
(optional)
Step 6
Step 5
Light bar
#8 nut
Light bar
connector
Panel catch
Slot in
bottom tray
Pg.8