VASTEX E2-2331, Инструкция по сборке и эксплуатации

Страница: 5 / 14

2) Install Lid Lifting Cylinders
Remove the acorn nut from the upper cylinder
mounting studs located on both sides of the lid.
Unlock and carefully lift lid far enough to slide
lifting cylinders onto studs. Replace acorn nuts
onto stud.
Snug only with a 5/8” wrench. Do not
over tighten!
1) Install Legs on Exposing Unit
(Models E2-2331/E2-4131/E2-4731)
1a) Place Legs on a clear spot on the floor,
28.5” (72.5cm) apart as shown in picture 1a.
1a
1b) Lock lid handles as shown. Carefully lower the
exposing unit down onto the legs. Two people are
required to do this as caution must be taken to not
damage the machine’s glass or rubber blanket.
1b
1c) Legs are installed with (8) 3/8" bolts and (8)
3/8” serrated nuts. Use (2) 9/16” open end wrench-
es and tighten all bolts well.
1c
2
28.5”
(72.5c
m)
Assembly
5