Dri-Cab Assembly
Hardware List:
A– #8x3/8” Phillips Sht Metal Screw(24)
B– 4-40 x 5/8” Phillips Pan Head Bolt(4)
C– 4-40 Hex Nut(4)
D– #4 Lock Washer(4)
E– #8 x 3/8” Sheet Metal Screw-Blunt tip(10)
Parts List:
F– Back Panel
G– Diffuser
H– Hinge Bracket– Door
J– Door
K– Deep Handle
L– Door Latch
1) Install Back Panel, Diffuser, Hinge Brackets-door as shown using a Phillips Head Screw Driver.
2) Install Deep Handle using a 1/4” nut driver or Flat blade screw driver.
3) Install Door Latch pieces using a 1/4” nut driver or Flat blade screw driver. Leave these slightly
loose until door is aligned to body.
