5)
Slide the Lower Screen Holder Assembly onto the Spine
Assembly from the bottom as shown on the right. Next
attach Extension Springs onto the Lower Screen Holder
Assembly and Spring Mount as shown. To decrease
amount of pressure on screen, use the lower spring
mount locations.
Assembly
Cont’d
5a
5b
6)
Install Upper Screen holder at desired position as shown
below. The Spine is marked to indicate which notch is
used for each size screen.
Spine
Upper Screen Holder
6a
6b
6c
6d
36” Tall Screen Location
31” Tall Screen Location
28” Tall Screen Location
23”/24” Tall Screen
Location
7)
To install a screen onto the C-100, install the Upper
Screen Holder at the appropriate position (See Step 6).
Then push down on the Lower Screen holder with the bot-
tom of the screen, pivot the screen in and guide it into the
Upper Screen Holder.
7a
7b
3