Vassilias Stiroplus SP1030, Руководство пользователя

Страница: 11 / 16

on/off button on, stays
you
the Set button. on/off
flashing. start will button on/off
The button. on/off
USE
This steam generator has 2 options: dry ironing or steam ironing. Follow the instructions below.
Also
carefully read the ironing tips at the end of this section before using the appliance.
Before using the anti scale cartridge
The anti-scale cartridge should be soaked in water, in a separate container for
approximately 5-10 minutes, before the first use and everytime you replace it with a new one;
not doing so could prevent the pump Steam Station from emitting steam.
DRY IRONING
1.
Place the iron on the thermal insulation pads of the steam generator.
2.
Put the plug into the outlet and press the
indication light of the
3.
Select the desired temperature with the temperature dial, according to
the kind of fabric that needs to be ironed. The temperature
indication light will start flashing and the iron will start warming up.
4.
When the temperature indication light stays on, the selected
temperature has been reached. You can now start ironing.
Caution: Never touch the hot soleplate!
STEAM IRONING
The machine works with normal tap water. In case of very hard water (hardness above 27ºF) we
suggest using 50% distilled water diluted with tap water. Alternatively, we suggest using normal
bottled drinking water. The use of de-ionized water is not recommended.
1.
Open the filling cap and fill the water tank with water. Make sure that you do not exceed the
maximum level (MAX) (2 L).
2.
Close the filling opening.
3.
Put the plug into the outlet and press the
temperature dial
in the steam area position ( ●●●).
The temperature
indication light and the indication light of the
on/off button will
continue flashing.
4.
The water in the water reservoir will heat up. When the temperature
indication light stays on, the appliance has reached the right
temperature. When the indication light of the
can iron with steam.
5.
To iron with steam, press the steam button on the inside of the
iron’s
handle. A continuous flow of steam will come out of the sole. When you release the button, you
will
iron dry, without steam. NOTE: for the first time of use, it takes about 90 seconds until steam
comes out of the sole of the iron.
6.
Use a steam boost to get rid of stubborn wrinkles. Press the steam button twice in rapid succession.
There is a 15-second wait in order to use the steam boost a 2nd time. Please note: the steam amount
must be set to medium or high.
Please note:
-Do not touch the hot sole of the iron!
-Never aim steam at people!
7.
Press the ECO button to iron on a lower steam level. The indication light of this
button will light up to indicate this function is in use.
11