button again, cycle operation.
Warning:
before removing the plug from the socket, switching
off and
before work for 30-60 seconds for cool down condition
that protecting inner parts.
TIMER FUNCTION
This function will work in any mode. The time function allows you to set
the length of operation from 1 hour to 8 hours. Press the time button in
the control panel, press one time will increase the length of operation by 1
hour, most 8 hours.
OVERHEAT PROTECTION
The heater is protected with an overheat protection that switches off the
appliance automatically in case of overheat e.g. due to the total or partial
obstruction of the grids. In this case, unplug the appliance, wait about 30
minutes for it to cool and remove the object which is obstructing the grids.
Then switch it back on as described above.
SAFETY CONTROL
To avoid damage and danger by overheating, your heater is fitted with
super protector that switch as off the heater in the event of overheating
until the temperature drops to some extent.
