13
．
To avoid scalding
，
always ensure the lid is correctly positioned before operation
．
14
．
Scalding may occur if the lid is removed while heating
．
15
．
Remove and replace the lid carefully when hot
．
16
．
Extreme caution must be used when moving the kettle containing hot water
．
Never lift
the kettle by its lid
．
Always use the body handle.
17
．
Do not switch your kettle on if it is empty
．
18
．
To protect from electrical hazard
，
do not immerse this kettle
，
power base or cord set in
any liquid
．
19
．
Use the kettle only with the supplied base unit
．
Do not use the base unit for other
purposes
．
20
．
To protect against fire
，
do not operated in the presence of explosive and/or flammable
fumes
．
21
．
While the water boiling or in the short time after the water boils, please be sure that
don’t attempt to open the cover for avoid the steam scalding your hand
．
22
．
Please avoid the liquid sprinkling in the LCD board and the pressed key place in the
operating process. Because the water possibly can plunge in the product, causes the
function to be unusual
．
23
．
Please do not have to add surpasses the maximum water volume the water, because this
has the possibility to damage the product, causes the product movement to appear
exceptionally
．
24
．
Please regular clean descale or pot bottom residuum, because this possibly can affect the
normal use of the product
．
25
．
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
26
．
This appliance should not be used by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been supervised by the person who is responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
27
．
Save the instruction
Instruction for use
1
．
Before use preparatory work
：
（１）
Before first use
，
fill the kettle with clean water to maximum capacity and boil
．
Discard
the water and repeat the process
．
（２）
The kettle should always be unplugged when filling or adding water
．
（３）
Fill the kettle with water to desired level
．
Do not overfill or there will be a risk of
spillage or spitting
．
The water level indicator will assist you to measure the correct
amount
．
You can fill the kettle via the spout or after opening the lid
．
Do not forget to
close the lid after filling
，
otherwise the kettle will not automatically switch off after
use
．
（４）
Do not fill with less than 0.5 liters of water
（
to “min” indication
）
to prevent the kettle
running dry while operating
．
（５）
Do not fill with more than 1.7 liters of water
（
to “max” indication
）
．
（６）
An automatic safety cut-out has been fitted for protection against overheating
，
it will
operate if the kettle is switched on when containing insufficient water
．
Always ensure
the water inside the kettle covers the minimum mark on the water level indicator
gauge
．
If the automatic safety cut-out has operated
，
switch the kettle off
，
disconnect
from the power outlet and allow the kettle to cool down for 5 to 10 minutes
．
The refill
with and switch on
，
the kettle will work as normal
．
（
7
）
After boiling, the kettle switches off automatically.
Disconnect the kettle from the mains electricity supply.
Do not open the lid when pouring.
If the kettle is overfilled, boiling water may be ejected.