Overheating Cutoff
This appliance is equipped with a thermostat that will cycle OFF(O)if the temperature
exceeds the comfort level due to partially blocked air inlet or outlet openings. In the
event that the appliance only produces cool air, turn the appliance OFF(O)and allow it to
cool down. Once the appliance cools, the thermostat will automatically reset and usage
may resume. During use, do not block the air openings. Periodic cleaning of the rear
intake cap is required to maintain proper performance. While using this hair dryer, it will
get hot at the air outlet. Avoid touching the air outlet or any accessories attached to the
outlet.
Storage
When not in use “unplug it.”
Allow the appliance to cool and store in a dry location. Never wrap the cable around the
appliance. Since this will cause the cable to wear prematurely and break. If the supply
cable of this appliance becomes damaged. It must be replaced by returning to the
retailer from which the product was purchased or a similarly qualified person in order to
avoid a hazard. Regularly check the main cable for wear and damage. particularly where
it enters the appliance and the plug.
This product carries the CE mark and is manufactured in conformity with the
Electromagnetic Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC.
New Ionic Technology
This new anti-static ionic hair appliance dries your hair faster. Negative ions reduce the
size of water droplets on the air. Allowing more water to be absorbed. This helps
condition, soften and make the hair shinier. The ionic function automatically operates
when the unit is switched ‘On’.
Ionic Technology-how it works.
1.
Negative ions cause large water droplets on the hair to be broken up in to smaller
drops.
2.
When droplets are smaller, more water is absorbed into the hair, hence the hair is
dried quicker.
3.
This also adds more moisture to the hair follicle, which has a conditioning and
smoothing effect.
4.
More light is reflected off a smooth surface, which will therefore make the hair look
shinier.
Styling
Towel dry hair before using the hair dryer, Set the dryer on High set setting and speed
and circulate airflow through hair, but do not concentrate airflow on any one area for a
long period of time. As soon as hair is almost completely dry, lower the speed and setting
and use a styling brush to shape hair.
Heat and Speed Control Button
High temperatures and speed settings are ideal for fast drying or pre-drying; low
temperatures and speed settings are ideal for styling.
Heat-switch Control:
●=cold S=warm SS=hot
Speed-switch Control:
0=off
Ⅰ
Ⅰ
Ⅰ
Ⅰ
=gentle airflow
Ⅱ
Ⅱ
Ⅱ
Ⅱ
= strong airflow
Airflow Concentrator Nozzle
Before drying thick hair with this attachment, use the dryer on the high setting to remove
excess moisture. The airflow concentrator nozzle attachment channels airflow for
smooth, manageable drying. Do not concentrate the airflow on any one area for an
extended period of time. If you desire to dry your hair quickly, remove the attachment
and set the dryer at the highest heat and speed setting.
