INIT PIN input and user PIN change (Initialization)
e Digipass can be used to sign documents only after the INIT PIN is changed to the user-defined PIN.
Before you start the procedure, please think of Your PIN (five digits).
To change INIT PIN you have to do the following:
Comments
Display
Action
№
1
PIN
e device prompts You to input initial
PIN (INIT PIN).
Input Your INIT PIN
2
XXXXX
-
If INIT PIN is correct:
3
NEW PIN
e device prompts You for PIN, which is
going to available only to You.
Input Your PIN
4
XXXXX
-
Repeat the input of
Your PIN
5
PIN CONF
e device prompts You to repeat the input.
If new PIN entered
correctly;
6
NEW PIN CONF
e Digipass initial PIN change was
successful.
XXXXX
e message FAIL appears, when repeated
PIN does not matches first entered PIN.
You will be offered to input a new PIN
again (p.4).
Press the button
and holding it press,
the button.
2
JSC “PNB Banka”
DP270 User’s Guide
