Vascat MAC R 080.070, Инструкция по эксплуатации и техническому обслуживанию

Страница: 50 / 60

INSTRUCTIONS AND MAINTENANCE MANUAL
MAC R MOTORS
PAGE: 50
CODE: CTT12 EDITION: 01 DATE: MAY 2013
Subject to technical changes without prior notice
Figure 16: Replacing bearings on MAC R motors (steps 6 and 7)
8. Heat the new bearing to 70°C to make it dilate and easier to insert in the shaft.
9. Insert the new bearing in the shaft. The hot bearing must be inserted fully without the need for hitting it.
This operation must be performed as quickly as possible. Do not let the bearing cool down.
10. Reassemble the Seeger shim washers.
11. Re-insert the rotor in the stator, taking care not to damage the windings.
12. Fit and screw up the covers and seals.
13. Refit the motor accessories.