Vascat MAC QM, Руководство по эксплуатации и обслуживанию

Страница: 30 / 56

OPERATION AND MAINTENANCE MANUAL
MAC QM MOTORS
PAGE: 30
CODE: CTT42 EDITION: 01 RELEASE: JULY 2016
Subject to technical changes without prior notice
3.8.2 Provision for torque flange assembly
As an option, motors in the MAC QM series can be adapted for the direct assembly of a torque flange or torque meter. The
assembly type is adapted according to each customer's specific requirements. The following figure shows one possible design:
Figure 7: Assembly with torque flange
3.8.3 Blocking device
As an option, MAC QM motors can be fitted with a rotor blocking device, which may be necessary for calibrating certain torque
sensors. The design of this device can be adapted to each customer's requirements. The following figure shows one possible
design:
Figure 8: Assembly with blocking device
Torque meter device
(Not included)
Blocking bars