Model # XLOGT2254CR-GB
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Page 5
Factory No. 33-10944
Assembly Instructions
Note: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,
go back and fully tighten all bolts. This will make it easier during assembly of unit.
1. Choose the option suits your needs. Locate Long Spine (D) or Short Spine (D1) and set
back face down on a scratch free surface as shown.
2. Align
the “U” shape bracket holes of three Shelf Frames (A, B and C) with the threaded
inserts on the Spine (D or D1) respectively. Make sure the protruding portion will face floor
after assembly. Insert and screw 3/4
” Bolts (3) with Flat and Lock Washers (5 and 6)
through the bracket holes into the Spine.
DO NOT tighten the bolts.
3. Proceed to insert and screw 1-1/2
” Bolts (4) with Washers (5 and 6) through the pre-drilled
holes on rear rail of three shelf frames (A, B and C) into the Spine.
Lock Washer
(9 used in this step)
⑤
Flat Washer
(9 used in this step)
⑥
3/4” Bolt
(6 used in this step)
③
1-1/2” Bolt
(3 used in this step)
④
