background image

THIS INSTRUCTION BOOKLET CONTAINS 

IMPORTANT

 SAFETY INFORMATION.  

PLEASE READ AND KEEP FOR FUTURE REFERENCE. 

VAS

®

                                                                  Page 1 

                                    Factory No. 10944 

Date 2014-08-14 Rev. 1 Factory: FOCIDI 

                                            

 

 

                                           

 

 

 

 
54" 3-in-1

TM

 Console 

Model # XLMEC54-LR 

U.S. Patents 8,079,311 & 8,191,485 

 

This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your 
needs. DO NOT discard any of the hardware or parts that you will not use on your chosen option. 
This will allow you to use this TV Console in different configurations at a later date, if desired.

 

 
 
 
 
 

 
 

 

 
                                           

 

 

 

 

 
 
 
 
 
 
 
 

 

 

ADULT ASSEMBLY REQUIRED 

 

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the 
store where it was purchased. Please call our toll-free customer service number and have your 
instructions and parts list ready to provide the model name, part name or factory number: 

 

1-866-942-5362 

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday  

Or visit our website 24 hours a day, 7 days a week for product assistance at

 

www.whalenfurniture.com 

Or e-mail your request to 

[email protected] 

 

 

LOT NUMBER:      

 

DATE PURCHASED:   /    /  

TV

TV

Содержание XLMEC54-LR





















Отзывы: