Model # XL50-6GB
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 56-12089
Page 5
Assembly Instructions
Note: Please do not fully tighten all bolts until you finish assembling all parts, then go
back and fully tighten all bolts, this will make it easier during assembly of unit.
1. Unpack the unit and confirm that you have all the hardware and required parts listed.
2. Locate Long Spine (D) on a level and protective surface with 2 round holes facing up as
shown in detail #1.
3. Align the holes on
“U” bracket of three Shelf Frames (A, B & C) with the threaded inserts on
the Long Spine (D), attach using 3/4
” Bolts (2) with Washers (5 & 6) through the bracket
holes into the Spine. See detail #1.
Required hardware in this step
Description:
(2) - 3/4
” Bolt (5) - Lock Washer (6) - Flat Washer
Sketch
Qty.
(12 pcs)
(12 pcs)
(12 pcs)
Tools required:
Allen Wrench
