Model # XL50-4MC
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Page 18
Factory No. 56-12089
Assembly Instruction for installing XYZ Mounting Frame onto BRICK, SOLID
CONCRETE OR CONCRETE BLOCK
29. Use the XYZ Mounting Frame (O) as a template, mark six holes location on the wall, three in
the top row and three in the bottom row of slots. Make sure that the holes are level and
there is at least 6” between any two holes, pre-drill these holes with a 1/2” masonry bit to at
least 2 1/2
” in depth.
30. Insert a Concrete Anchor (9) into each of these holes; make sure they are completely
seated and flush with the concrete surface, even if there is a layer of drywall or other
material in front of the concrete.
31. Attach the XYZ Mounting Frame (O) to the wall using six Lag Bolts (8) and Large Flat
Washers (7
) through the slot of “C” Plate on Mounting Frame into the Concrete Anchor in
the wall as shown in detail #14. Make sure the back hook of Mount Frame is bottom.
Concrete Anchors should only be used for masonry mounting.
NEVER use the wall anchors to mount the unit to drywall.
Maximum weight 165 lb. (74.8 kg)
Hardware provided
Sketch
Qty.
(7) Large Flat Washer
(6)
(8) 2-
1/2” Lag Bolt
(6)
(9) Concrete Anchor
(6)
Tools required:
Mallet, Power Drill, 1/2” Masonry Bit for brick concrete, Socket Set and level.
