Model # XL50-2MC
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 56-12089
Page 5
Assembly Instructions
Note: Please do not fully tighten all bolts until you finish assembling all parts, then go
back and fully tighten all bolts, this will make it easier during assembly of unit.
1. Unpack the unit and confirm that you have all the hardware and required parts listed.
2. Locate Long Spine (D) and set back face down on a scratch free surface as shown in detail
#1.
3. Align the holes on back rail of three Shelf Frames (A, B & C) with the threaded inserts on the
Long Spine (D), insert and screw 1 1/4
” Bolts (3) with Lock Washers & Flat Washers (5 & 6)
through the pre-drilled holes on back rail into the threaded inserts included in the Spine.
Ensure the edge with two holes of end brackets will face the floor as shown in detail #1.
3
5
D
A/B/C
D
Required hardware in this step
Description:
(3)
– 1 1/4” Bolt
(5) - Lock Washer (6) - Flat Washer
Sketch
Qty.
(6pcs)
(6pcs)
(6pcs)
Tools required:
Allen Wrench
