Model # RTG40A1
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 56-12089
Page 6
Assembly Instructions
6. Stand the unit upright. Go back and tighten all the bolts with Allen Wrench provided.
7. Put Suction Cups (1) firmly into top holes of the Middle & Bottom Shelf Frame (B & C) as
shown in detail #3. Make sure that the Suction Cups go all the way into the pre-drilled holes
to prevent the glass shelf from falling and getting damage.
8. Screw the Glass Raisers (6) onto the top holes of Top Shelf Frame (A) and Left & Right Leg
(E & F), make sure they go all the way in. See detail #3A.
9. Place the Top Glass (G) & Glass Shelves (H & I) in place as shown in detail #3. Make sure
the glass is properly centered and the black side of glass is down. Also, be sure to press
down evenly and firmly each shelf onto the Suction Cups to make sure they securely rest
onto the Suction Cups.
Note: Make sure that the glass sits correctly. If glass is scratched you can minimize the
damage by using a BLACK marker and filling in scratched area from underneath.
10. In case of uneven floor, Floor Levelers are provided at the bottom of both Legs (E & F).
Simply tilt the unit back and raise or lower floor leveler by hand to correct tilting, until the unit
is level. See detail #3A.
Note: When adjusting the height and tilting the unit make sure that
you ask for assistance to prevent the glass from falling.
Required hardware in this step
Description:
(1)- Suction Cup
(6)- Glass Raiser
Sketch
Qty.
(12 pcs)
(6 pcs)
