Model # HT5206
VAS Furniture Mfg. Inc.
Factory No. 72-14494
Page 4
Assembly Instructions
Note: Please do not fully tighten all bolts until you finish assembling all parts, then go back and
fully tighten all bolts, this will make it easier during assembly of unit.
1. Unpack the unit and confirm that you have all the hardware and required parts listed.
2. Align and attach Left & Right Side Frame (C & D) to the Front Frame (A) using eight 5/8" Bolts (2)
with Flat Washer (3) through the plate holes in place, as shown in detail #1.
DO NOT TIGHTEN
BOLTS UNTIL ASSEMBLY IS COMPLETE.
3. Attach Back Frame (B) to the last assembly using four 1 1/2" Bolts (1) with Flat Washers (3) through
the top rail of the Back Frame into the top threaded socket on the side frames, as shown in detail #2.
4. Proceed to attach the Back Frame (B) to both Side Frames (C & D) using four 5/8" Bolts (2) with Flat
Washers (3) through the bottom bracket on Back Frame in place. At the side of the TV stand secure
both Side Frames to the Back Frame using two 1 1/2" Bolts (1) with Flat Washers (3) through the
side frame into the threaded socket on the Back Frame, as shown in detail #2A.
NOW FULLY
TIGHTEN ALL BOLTS WITH ALLEN WRENCH PROVIDED.
5. Attach Floor Levelers (7) to the posts of Front Frame and Back Frame (A & B) for the necessary
adjustment, as shown in detail #2A.
Please call for replacement parts or assistance:
1-866-942-5362
