6 / 7
152 – 159
160 – 167
168 – 175
176 – 183
184 – 191
192 – 199
200 – 207
208 – 215
216 – 223
224 – 231
232 – 239
240 – 247
248 – 255
Program 19
Program 20
Program 21
Program 22
Program 23
Program 24
Program 25
Program 26
Program 27
Program 28
Program 29
Sound 1
Sound 2
2
0 – 255
Speed from slow to fast
3.3. Automatic mode.
To enter the automatic mode push the ESC button. After that use the UP/DOWN buttons until
“auto” is shown in the display. Push ENTER to enter the menu Now the display shows „Aut”. Push
Enter to see the speed adjust menu. The display shows “SP x” and x stands for a letter from 1 to
9, which is for adjusting the speed.
3.4. Sound to Light mode
to choose the sound to light mode, go on as you read here:
Push the ESC button first. Then use UP/DOWN buttons until you see “Soun” in the display. Push
ENTER You can read “Soux” in the display and with the UP/DOWN buttons you can choose
between the 2 sound programs. Push Enter to see the speed adjust menu. The display shows “SP
x” and x stands for a letter from 1 to 9, which is for adjusting the speed.
3.5. Master Slave mode
Push the ESC button first. Then use UP/DOWN buttons until you see “SLav” in the display. Push
ENTER. Now the fixtures works in slave mode and copies exact the values from the master
fixture.
For the connection of master fixture and slave fixture, please use a standard dmx 3 pole XLR 110
Ohms cable. Connect the male connector to the master and the female connector to the slave
fixture. Go on like this until all the fixtures you want to be connected, are connected. Set up your
desired settings at the master and all the slaves will copy the functions of this fixture.
3.6. Version number
Push the ESC button first. Then use UP/DOWN buttons until you see “VER” in the display. Push
ENTER: Now you can see the actual software version. Leave the menu with ESC.
