Varytec Wind Up 85 kg TUV, Руководство пользователя, Страница: 16 / 24

1.
Loosen the safety screw [1 ] on the carriage. Pull the safety bolt [11] out of the main tube
[4] and unfold the stand feet [2] until the safety bolt [11] engages in the desired position
in the main tube [4] .
2.
Fix the position with the safety screw [1] on the carriage.
3.
In case of uneven ground, loosen the safety screw [3] of the adjustable foot, pull out the
corresponding safety bolt and align the foot so that the stand is horizontal and stable on
the ground. Fix the position with the safety screw [3] .
4.
Flange the crossbar onto the mount for the crossbar at the stand top end [10] and
tighten the safety screw of the mount. Attach the spotlights. Pay attention to an even
weight distribution to reach a centric load of the stand. The maximum load capacity of
85 kg in total must not be exceeded.
5.
Loosen the safety screw [5] on the tube clamp of the square tube [8] . Pull the safety bolt
[13] out of the upper extension tube [6] and crank the upper extension tube clockwise
with the crank [9] until the safety bolt [13] engages in the desired position in the upper
extension tube.
6.
Fix the position of the extension tube with the safety screw [5] on the tube clamp of the
square tube [8] .
7.
Loosen the safety screw [7] on the tube clamp of the main tube [4] . Pull the safety bolt
[12] out of the square tube [8] and crank the square tube clockwise with the crank [9]
until the safety bolt [12] engages in the desired position in the square tube.
Operating
16
Wind Up 85 kg TÜV
lighting stand