Varytec Wind-Up 380, Руководство пользователя

Страница: 18 / 24

1. Loosen the safety bolt [6] on the lower tube clamp.
2.
Loosen the two locking screws [4] on the upper and lower tube clamps and lower the
extension tube with the crank [5] all the way down.
3.
Tighten the locking screws [4] on the upper and lower tube clamps.
4. Remove the spotlight(s). When dismounting, take care for balanced load, too.
5. Loosen the safety screw [3] on the truss beam mounting and detach the truss beam.
6.
Loosen the safety screw [2] on the slider to which the three cross braces are attached.
7.
Fold up the feet of the tripod.
8. Pack all parts of the system in their original package, as possible, and store the package
in a dry place protected against moisture.
Dismounting
Operating
18
Wind-Up 380
lighting stand