6 / 7
3. After connecting to the power source you can start the fixture.
4. Attention: The xlr plug is no dmx plug! Never use dmx fixtures in one line with this effect.
4. Starting up
1. Plug in the power cord. Now the fixture is in music mode
2. The fixture reacts to sound impulse
3. With the potentiometer on the back you can control the sensitivity
4. if there is no music impulse for 10 sec, the led shuts down until there is the next music impulse
5. Master Slave Mode
1. Choose the fixture that should work as master
2. Chosse the desired sensitivity with the poti on the back
3. Connect the other fixtures to the master
4. therefore use a standard DMX XLR cable
5. Set the sensitivity on every slave fixture to zero
6. now every slave fixture reacts as the master do.
7. Attention : the XLR plug is no dmx plug. Never use dmx fixtures in a line with this effect.
