4 / 5
Important:
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems. Make sure the electrical connection is carried out by qualified
personnel. All electrical and mechanical connections have to be carried out
according to the European safety standards.
2. Installation of the lamp
General the Mini Studio Par for Par 30 up to 75W lamps is for these lamps only!
The filterholder is included already and can be slipped into the frontside holders. In every case you
should prevent the filter holder from falling by using the bracket at the top side of the Studio Par.
Make sure that this side is installed always on top when you mount the Studio Par.
!!Attention!!
You can insert all Par30 lamps with max 75W and 230V, you shall never use different or bigger
lamps. One fitting lamp is included already.
Make sure to replace the lamp when it is damaged.
Make sure that the led lamp you are going to use is fitting your mains voltage!
Warning! The usage of this Studio par with too high or too low voltage can set down the
lifetime and destroys the lamp.
1. Disconnect the item from the mains, before you change the lamp.
2. Turn the lamp counter clockwise to take it out.
3. Take a Par 30 lamp with E27 socket and max 75W and turn it clockwise back in.
Warning! Non fitting lamps can cause a defect of the lamp or even of the socket!
3. Technical data
Voltage
AC 240V/ 50Hz
Power consumption
Up to 75W
Meassures
d137 x L182mm
Weight
1,3Kg
Lamp
Par 30 Lamp for E27 Socket 230V
(1 x included)
Ambient temperature
Max -10°C – 40°C
Protection Class
IP20
Cooling
Convection cooled
