Varytec Street Bar MK3, Руководство пользователя

Страница: 33 / 60

This setting is only relevant when the device is controlled via DMX.
Press
[MODE] repeatedly until the display shows ‘dxxx’ .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use [UP] and [DOWN] to select a value between 1 and 512 (the display shows ‘d001’ … ‘d512’ ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible first DMX address for the various DMX modes.
Mode Highest possible DMX address
2-channel 511
3-channel 510
5-channel 508
24-channel 489
Wait about 30 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [MODE] .
DMX address
Operating
Street Bar MK3 IP65 16x3W RGB
33
LED bar