Varytec Street Bar IP65 16x3W TW, Руководство пользователя

Страница: 35 / 52

A constant unicoloured pattern can only be activated when the unit is operating in stand
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press
[MODE] repeatedly until the display shows ‘Colr’ .
Press [SETUP] to open the menu for the ‘Warm white’ adjustment. With [UP] and [DOWN] you
can set the intensity in a range from ‘S.000’ … ‘S.255’ .
Press again [SETUP] to open the menu for the ‘Cold white’ adjustment. With [UP] and [DOWN]
you can set the intensity in a range from ‘U.000’ … ‘U.255’ .
To adjust the strobe frequency, press [SETUP] repeatedly until the display shows ‘FS.xx’ . With
[UP] and [DOWN] you can now select a value between ‘FS.00’ (slow) and ‘FS.99’ (fast).
Wait about 20 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [MODE] .
Constant unicoloured pattern
Operating
Street Bar IP65 16x3W TW
35
LED bar