4 / 5
Important:
Damages caused by the disregard of this user manual are not subject to warranty.
The dealer will not accept liability for any resulting defects or problems.
Make sure the electrical connection is carried out by qualified personnel.
All electrical and mechanical connections have to be carried out according to the
European safety standards.
3. Start-up procedure
Check the machine for transport damages.
Fill in the snow fluid into the tank and close the tank. Always close the fluid tank and the fluid
canister to avoid contamination by dust and other foreign matter. Fill the fluid tank to max. 2/3 and
do not keep the fluid in vicinity of children. Use only the appropriate fluid. Do not operate the
machine without fluid (dry). Connect the remote control to the "CONTROL INPUT" socket and
switch “ON” the machine. During operation, you can hear a fan noise.
4. Remote control
If you push the switch to position „I“ then the machine starts with „Snow production“.
To stop the „Snow production“ you have to push the switch to position „0“.
The Volume control allows you to adjust the output volume.
5. Cleaning and Maintenance
Do not use chemical or volatile liquid for cleaning! Metal parts can be cleaned with a damp cloth.
Always disconnect the power plug before cleaning the machine!
Clean the snow machine after about 40 hours of operation. Flush the machine with 1-2 liters of
distilled water. Clean the textile of snow throw-off at regular intervals.
6. Technical data
Power Input: 110-230V 50/60HZ
Power output: 1200W
Snow volume: 40m³
Capacity: 5 liters
Dimension: 600x370x370 mm
Weight: 9,5 kg
