7 / 10
4.2. Description of the Menu
System Menu: When confirming your setting press ENTER and then hold MENU for at
least 2-3 seconds, or you can wait 1 minute for automatic setup. To exit without making
any adjustments press the MENU button.
Addr
DMX address setting
1. Push the UP/DOWN buttons until the display shows Addr.
2. Push ENTER
3. 1 appears in the display blinking. With the UP/DOWN buttons you can no adjust the DMX
address from 1 to 512
4. Push ENTER to confirm
SLNd
Master Slave Settings
1. Push the UP/DOWN buttons until the display shows SLNd.
2. Push ENTER
3. Use the UP/DOWN buttons to choose from MASt, SL1 and SL2.
4. Push ENTER to confirm
CHNd
channel adjust
1. Push the UP/DOWN buttons until the display shows CHNd.
2. Push ENTER
3. Use the UP/DOWN buttons to choose from CH4 or CH256.
4. Push ENTER to confirm
SHNd
choose your showl
1. Push the UP/DOWN buttons until the display shows SHNd.
2. Push ENTER
3. Use the UP/DOWN buttons to chosse from the autiomatic shows 1 to 12.
4. Push ENTER to confirm
5. Attention! This mode works only in master mode!
bLNd
Blackout or Stand By Mode
1. Push the UP/DOWN buttons until the display shows bLNd.
2. Push ENTER
3. Use the UP/DOWN buttons to choose from on and oFF
4. Push ENTER to confirm
