Varytec LED Theater Spot 120 FC, Руководство пользователя

Страница: 22 / 40

Press [Menu] . Press [Up] or [Down] repeatedly until the display shows ‘Addr’ and confirm with
[Enter] . The display shows ‘AXXX’ . Now you can set the number of the first DMX channel to be
used by the device (DMX address). Use [Up] or [Down] to select a value between 1 and 512.
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
4-channel 509
6-channel 507
8-channel 505
Confirm the selection with [Enter] . With [Menu] , you return to the parent menu.
To return to the parent menu without changes press [Menu] without prior confirmation.
Press [Menu] . Press [Up] or [Down] repeatedly until the display shows ‘rL--’ and confirm with
[Enter] . The display shows ‘rLXX’ . Use [Up] or [Down] to adjust the Dimmer function in a range
from ‘rL00’ … ‘rL15’ (off … maximum brightness).
Confirm the selection with [Enter] . With [Menu] , you return to the parent menu.
To return to the parent menu without changes press [Menu] without prior confirmation.
DMX address
Dimmer red
Operating
22
LED Theater Spot 120 FC
LED Spotlight